Hey! Chances are you’re here because you’re a brand new succulent owner eager to give your new friend the best possible care, or perhaps you’ve a pal who’s not looking so hot.
Either way, the below guidelines can help get you on the way to a happy plant.
Keep in mind, these are general guidelines for beginners.
There’s a lot more behind each concept and there are many other methods out there, but we feel these are the best intro-level steps to get you starting out on the right foot.
Be sure to check out the FAQ as well.
Pots & Containers
There is no substitute to a pot with drainage holes in the bottom!
Even a pot with gravel at the bottom traps moisture (and reduces the effective size of the pot), so for beginners, pots with drainage holes are critical.
Unless situated in a very hot, dry climate, unglazed terra cotta pots will be your best bet. Failing that, just about any pot with holes in the bottom will do.
Pots without drainage holes can leave roots sitting in damp or soggy soil, greatly increasing the risk of rot or overwatering.
Water can also accumulate in the saucer so it is worth checking back on the plants after watering them.
Green Thumb Revival May Earn A Commission For Purchases Made After Clicking Links On This Page. Learn More.
Pot size matters.
Pot size is also important when it comes to water retention. Large pots retain more water than smaller pots, and for this reason we do not recommend using a larger pot than is needed.
Aim for a pot which allows the root ball to take up 1/2 or 2/3rds of the pot and err on the side of underpotting.
Sometimes, the roots of a succulent will be soaking wet, overly cramped in the original pot, or beginning to rot.
It’s best to attempt to remove as much of the old soil from the root ball as possible.
Tangled roots are fine and will sort themselves out, but try and break up the large clumps of soil/other material within them.
- “Wet feet”/wet roots: remove the soil, let the roots dry out for a day or so, and then plant. This helps lower the chance of bacteria getting into any accidentally-damaged roots during the repotting process.
- Too many roots: make sure your new pot has adequate size for both the root ball and the rest of the plant (see “Pot size matters” for more information). Entangled roots are normal and will generally not be an issue- don’t worry!
- Root rot: this can be a result of prior overwatering, planting when roots are damaged, or something in the soil. Clean out as much soil as possible from the roots and inspect them carefully. If you notice signs of rot (black or yellow areas, overly mushy or dry/crumbly areas), carefully remove the affected root(s) with a clean, sterile instrument. Do not immediately plant! Let the cut end(s) heal over (a couple of days, or until dry to the touch) and then plant. Planting while the succulent is “wounded” increases the risk of further rot, as bacteria can get into the wound and infect the plant.
Some succulent lovers rinse off the roots of their succulents when they repot.
Whether you want to or not is entirely up to you! Be sure to let the roots completely dry before repotting in case of any accidental damage while rinsing.
If your plant is wobbly in its pot at first, don’t fret! Roots tend to take some time to get established and work their way into the soil.
You can check if your plant is getting accustomed to its new home by gently tugging on it every few days- wiggles mean it’s still settling in, minimal or no wiggles means it’s happily planted!
Terrariums, even those with drainage holes in the bottom, are not recommended for beginners.
Being that succulents largely originate from arid desert environments, the damp humidity of a terrarium is almost the polar opposite of what a succulent wants.
Great care must be taken to prevent plant failure in this environment, even more so for plants to thrive in it.
A fast draining Succulent Soil mix is key.
An ideal potting mix for succulents does not stay damp or soggy for days on end, but drains freely and dries quickly.
Soil which stays damp for too long can quickly lead to root or stem rot, in addition to harboring things like fungus gnats or (benign) mushrooms.
The cactus & succulent soils you find at big box retailers sold in big sacks with recognizable names tend to retain water considerably, despite any “fast draining” verbiage on the package.
While plants can survive in these soils, it’s very easy to overwater or lose one to rot in them as well.
The quickest and easiest way to get a faster draining mix is to modify a basic cactus & succulent soil by mixing it with perlite in a 1:1 ratio. Pumice, turface (aka fired clay), or chicken grit.
Perlite can be found at on amazon or your local Home Depot or Lowe’s. Turface can be found in bulk (35+lbs) at local auto part stores sold as “Oil-Dri” or oil absorbent (make sure the bag says montmorillonite clay or calcined clay.)
Chicken grit can be found at Tractor Supply Co. known as “Manna Pro Poultry Grit” found in 25lb bags.
Dry thoroughly between watering.
The most important thing to remember is that the soil, and the plant, should dry completely and thoroughly between watering.
You can check if your soil is completely dry by pushing a wood chopstick or skewer down into the center of the pot to check for dampness (sorta like checking if a cake is done).
With practice, you can also compare the weight of a completely dry pot against a freshly watered one to get a sense of whether any water remains in the soil.
Don’t aim to develop a “watering schedule”, instead, learn to recognize what your plant looks like when it’s thirsty.
When in doubt, don’t water. Signs of thirst can include: wrinkled leaves, thinning leaves, curling leaves, rosette forming succulents may close inwards, while bushier genera leaves may droop and feel thin.
It’s not about the amount of water
All of the above sections work together to help ensure you can water your plants without worry of overwatering or rot.
There’s no need to give your plant water by the tablespoon, in fact, a full soak can be good for the plant.
Saturating the pot until water drains from the bottom can help make sure water gets to all areas of the soil, as well as flushing out any lingering minerals which might otherwise accumulate.
Lithops and other mesembs: Further research should be done to learn about their specific watering needs, as they typically want water much less frequently than other succulents. You can read up on their care here.
Misting – not as useful as you think.
Though it seems to be common advice, misting your plants does not do a whole lot to quench their thirst.
It’s sort of like spraying yourself in the face instead of drinking a glass of water.
In fact, spraying their foliage can trap water between leaves, sometimes leading to rot.
A common way to water your plants would be to “bottom water” or “bottom up water”, this method involves having the plant absorb the water it needs by placing it in a vessel with sufficient water depth.
Common vessels include bathtubs, storage totes, anything that allows you to dip the pot into the vessel, let the water rise to near the rim if you’re in a hurry.
The water will be forced up through the hole in the bottom, watering your plant and completely saturating the soil.
Some will use a more shallow tray with less water and sit all their plants and letting them soak over a longer period, 20-30 minutes is common.
Benefits of bottom watering: Bottom watering is important to use if your soil is very fast draining. If the soil drains well enough, the water may not reach all the areas of the soil.
Etiolation or “Why is my plant so tall?”
By and large, succulents want some amount of direct sunlight each day, and many of them want “full sun” – or direct sunlight for 6 or more hours. Without the desired amount of light, plants will etiolate, or seem to “reach” for the sun.
The characteristics of etiolation can vary, but may look like:
- Increasingly large gaps between leaves
- Thinner stems toward the top of the plant
- Uncharacteristically tall succulents
- Elongated leaves
- Leaves which droop, flatten, or fan out
- Underdeveloped leaves at the top of the plant, sometimes leading to a conical or christmas-tree shape
Etiolation cannot be reversed, but new growth will come in compact if you gradually introduce the plant to more sunlight.
Sudden increases in light can scorch your plant, so spread any increases in light over a series of days or weeks (depending on the degree of increase).
Direct sunlight refers to light which comes straight from the sun and shines onto your plant without reflecting off anything first (e.g., your plants have line-of-sight to the sun).
Windows do reflect some amount of light, but for the purposes of this wiki (and generally in this sub), direct sunlight also applies to indoor plants receiving sun through a window.
Indirect sunlight refers to light reflected off or filtered through something before reaching your plant.
For example, a room brightly lit by sunlight coming in through a curtain, or a plant shelved on a wall alongside a window.
This does not include general indoor artificial lighting, such as office lights or general home ceiling lights. If the use of artificial light is required, a grow light is recommended.
Getting plants used to sun: for new plants or new-to-you plants, it’s best to try and start them in their previous lighting conditions and, if needed, work upwards to full sun (or as much light as you can give them) from there!
Sunburn can happen to plants just like it happens to people, except sunburned succs will generally drop the burned leaves and look sad for a little while.
To prevent sunburn and keep your plants healthy, you want to get them used to more and more light every day or every few days.
Succulents that are already kept in full sun are fine and may continue to be kept in full sunlight.
For anything less than full sunlight, however, here are some quick tips:
- Start out with your plant in a space where it will get roughly the same amount of light it has been getting.
- Within the next day to couple of days, increase the amount of light it gets (either leave it in that space for longer, or give it more full sunlight)
- Continue adjusting the plant to more and more light over time (you can start with 1 hour on Day 1, then 2 hours on Day 2, etc. for example)
- Repeat until your plant is receiving adequate sun for the type of plant it is- remember, all plants are different and something like an Echeveria will generally need more light than something like a Haworthia!
For new or new-to-you plants, try and start them out in a level of sunlight that the plants would have been accustomed to in their previous location- i.e., if you purchased it from inside a store with minimal natural sunlight, take your time getting your succulent accustomed to sunlight, whereas if you got it from a sunny outdoor greenhouse, full sunlight is likely fine.
That’s entirely up to you and your location! People who don’t live in very sunny areas tend to supplement their plants’ growth with grow lights or LED lights. This keeps the plants healthy, vibrant, and compact (prevents etiolation).
Some are, some are not.
Succulents are plants that have parts of them more than normally thickened as a result of water retention.
Such plants need to retain water because the are usually to be found in the more arid areas of the world or in areas where soil conditions are unfavorable to other types of plant life, e.g. sea coasts where salt levels in the soil would kill off most other plant life.
Water may be retained in the stem, leaves or root.
Whilst some succulents may be poisonous to humans, they include some plants that have proven extremely beneficial to man such as the Cacti family (well over 1000 types); the Aloe family (over 500 types), the most famous of which is Aloe Vera; and the Sedum, also known as stonecrops, (more than 600 types) which have been used by man for food, medicinal and ornamental purposes for ages.
Purslane is a herb used in french cooking to add a bright lemony flavor, it also can thicken soups. This is the same fleshy plant that grows in driveways, it can also be bought from garden centers(rose moss, portulaca).
Agave, while dangerous as a plant because of its spines, is where tequila comes from. There are some varieties that can be fashioned into a crude needle and thread which can be used to suture wounds or repair clothing.
Aloe has been used medicinally, pretty much since it was discovered. It is used widely as a topical treatment for inflammation. Internally it has been used as a diuretic, a laxative, to relieve cramps, treat arthritis, fever, uclerative colitis, ulcers, asthma, and even diabetes. Also to thicken soups!
Euphorbias can be very toxic. Causing a rash or blistering on the skin and even breathing the vapors can cause respiratory distress.
The problem with eupborbias is the extreme diversity they show. From looking like a shrub (poinsettia) to cactus (Pencil cactus) to lumps of nothing ( Euphorbia decaryi ). They do all have the same milky sap, which is the source of the toxins.
There are far too many succulents to mention. If you have kids or pets, aloes, begonias, and jades are usually safe. There are many plants that we think are pretty but are actually toxic or down right poisonous.
What is the best soil for succulent plants?
There are many factors that determine the best succulent potting mix – mostly environmental conditions – that cause the soil to dry out at different rates. Therefore, different types of succulent potting mix will be ideal for different growing areas.
The main problem often associated with choosing the wrong soil for succulents is over-watering. Soil that are not suitable for succulents are those that hold too much water for long periods of time. This essentially results in root rot, which is the main cause of death for succulents.
Succulents grow best in airy soil and soil which doesnot hold moisture .
DIY Soil Mixture For Succulents:
- 30 % of soil
- 30% of pumice
- 20% of orchid chips or coconut chips (not cocopeat)
- 20% of clay rocks
This will be a better mix for succulents.
If you prefer to buy a pre mixed soil here are our picks for 5 good pre-mixed soils for succulents. They are (in no particular order):